To comply with Trademe's conditions of sale the power plug has been removed, otherwise in perfect working order.

Integrated Amplifier from 1978. Near-immaculate condition inside and out, inbuilt phono stages for Moving Magnet and Moving Coil and comes with a step-down transformer.

Pick up available from Sandringham, Auckland or delivery can be arranged. Please ask if you would like any more info and thanks for looking :)

Description from AudioDatabase.com Please go to https://audio-database.com/TRIO-KENWOOD/amp/ka-8100.html for full list or specifications.

TRIO KA-8100 High-speed DC integrated amplifier. A newly developed high-speed circuit has been adopted to improve the waveform collapse and turbulence that are likely to occur at high speed.

A straight DC amplifier configuration is adopted without a low-frequency cut capacitor in the signal path from the Tuner (Aux) terminal to the SP terminal or in the NF loop.

The MC head amplifier section adopts a complimentary service push-pull circuit for all stages using a low-noise transistor for the first stage.

The power supply section uses a large power transformer and four 6,800 µ F high-capacity electrolytic capacitors, and two power supplies on the left and right sides to reduce mutual interference.

Rated output: 60W + 60W (8 Ohms, 20 Hz to 20 kHz) (phono ? sp terminal, both channel operation): 65W + 65W (8 ohm, 1 khz)

Total harmonic distortion factor (8 Ohms) Phono to SP terminal: 0.02% (at rated output, 20 Hz to 20 kHz, Vol-20dB) Tuner, Aux, Tape-to-SP connector: 0.02% (20 Hz to 20 kHz at rated output); 0.004% (1 kHz at rated output); 0.01% (20 Hz to 20 kHz at 1/2 Rated Output)