G96 Gun Treatment 12 Oz G96 Gun Treatment is the same as G96 Gun Oil except that is an aerosol and not a liquid. G96 "Triple Action" Gun Treatment is the finest most complete firearms product made. It Cleans, Lubricates, and Protects your gun in one operation. No solvent or preservation is necessary. Cleans Your Gun: Contains solvents that will completely remove all traces of rust, gun powder, leading, and corrosion in seconds. Lubricates Your Gun: This contains lubricants that will not freeze, oxidize, or evaporate (the result of missile research). Leaves no gummy residue. Keeps firing pin and all moving parts working as low as -50F below zero; insures perfect firing every time. Protects Your Gun: Leaves invisible magnetic film over all metal parts which protects your gun against rust under all weather conditions, even salt water spray. Protects frequently handled guns against "fingerprint" damage. This is the single and best gun care maintenance product ever designed to solve a gun owner's cleaning, lubricating and corrosion protection problems. A unique formulation of active lubricants will not freeze, oxidize or evaporate. Designed with a pleasant odour, this gun treatment is assured of perfect firing from 50 F below zero to 350 F. Safe for use on polymers. Directions for use: If necessary, clean the firearm first using G96 Bore Solvent or G96 Crud Buster. Spray evenly over the area to be treated. Allow sitting for 60 seconds. Wipe with a clean cloth. Apply to all metal surfaces, inside the chamber and inside the barrel. Wipe after application. When treating a gun for the first time or for long term storage protection, spray three times, wiping dry after the first and second application. Note: After treating the gun allow the solvent contained in the oil to evaporate for 10 minutes before placing a gun in an airtight container such as a gun case, sealed carton, etc. G96 stock 1055P