This listing closed and did not sell. The item has been relisted.
- Browse for similar listings in Paint
- View the relisted item
POR-15 SAFETY RED Top Coat | Quart (946mL)
Description
THIS IS GENUINE POR-15 PRODUCT WE IMPORT DIRECT FROM POR-15 USA. THAT IS WHY ALL OUR SIZES ARE IN US MEASUREMENTS; BEWARE OF OTHERS COPYING THE ORIGINAL
POR-15® Top Coat - Direct to Metal - Safety Red - Quart 946mL
Also available in these sizes: 46101 Safety Red Top Coat | Gallon 3.78Lt 46118 Safety Red Top Coat | Aerosol - 16oz.
POR-15 Top Coat is direct-to-metal coating designed to work incredibly well in all applications where there is a need to preserve substrates susceptible to corrosion.
Directions: All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter. Previously Painted Areas: Scuff surface with 320 grit sand paper. Use POR-15 Cleaner Degreaser and POR-15 Metal Prep. Let surface dry thoroughly. Bare Steel or Aluminum: Clean and prep surface then let dry thoroughly. For ultimate protection apply POR-15 Rust Preventive Coating after surface preparation and then apply POR-15 Top Coat. Stir POR-15 Top Coat before and during use, DO NOT SHAKE. Using a pouring spout, dispense a portion into a separate container and seal can at once, keeping lid and grooves clean. Do not paint out of can.
Apply POR-15 Top Coat in two thin covering coats. Spray: Use 25-30 lbs (170Kpa-210pa) pressure for normal gloss. Roller: Use all-purpose short nap phenolic core roller. Dry time: It cures to touch in 30-60 minutes. Second coat can be applied in 2-72 hours, depending on ambient temperature and humidity. POR-15 Top Coat can take 3-4 days to reach max hardness, and longer in temperatures below 15°C. Clean up: Do not put leftover paint back into can.
Clean all equipment immediately after use with POR-15 Solvent. Flush out all fluid lines and carefully clean pressure pots. Use clean solvent only.
Theoretical coverage: 250-450 sq. ft. per gal., depending on surface.