Protect your crew from the harsh sun with the XAIR Indy Tower Mounted Rigid Frame Bimini Top!

Note : The Wakeboard Tower's pictured are NOT INCLUDED.

These Tower Mounted Bimini Tops have a fully adjustable clamp mounting system to suit Towers from 1.3/4" (45mm) to 2.1/2" (63mm) diameter Tubing.

They will also suit most boats as they come in two widths - 1350mm and 1580mm wide. To choose the correct width simply measure the narrowest point between your Tower at the ideal mounting height. i.e. if allowing 10mm gap each side to the Tower then if the gap is 1370mm to 1600mm then you will need the 1350mm wide model. If that width is 1600mm + then the 1580mm wide model will suit.

They can be set up under the tower to suit individual customer/boat requirements... i.e. lower down gives more coverage from the sun but higher gives more headroom.

Can be set up level or with front slightly angled downward for that streamlined look when boat is underway

Polished Stainless Steel Frame...

High grade UV rated canvas...

Will fold down down with Tower when mounted to the main hoop of the Tower as per last two pictures

Standard colour Canvas is black only

Please specify the tube size (outer diameter) of the Tower that the Bimini will be mounted to so that we can send the correct clamp size.

See our other auctions for Towers, Board Racks, Ski Racks, Speakers, Mirrors and Ballast

Buy your Tower from X-AIR Wakeboarding , we've been manufacturing Towers since 2002, do it once, do it right! 100% Money back guarantee if the Tower doesn't fit your boat!

Yes, in stock in our Pukekohe Warehouse

Stated shipping prices are for non-rural addresses. If you have a rural address, please contact us (ask a question) so that we can give you a fixed shipping price based on your address