2 Lots of 5 x Stainless Steel Nipple Automatic Waterer

Please Note: the T supplied maybe white instead of red (as shown in photo).

Suitable for Rabbits, Gunea Pigs, Rats, Mice, and other small Pets in a cage.

Features and Benefits

• Good quality structural design
• Made from stainless steel so they can't be chewed to pieces compared to plastic
• Removable lower parts for easy cleaning
• Easy to setup
• Reduce water wastage while your pet gets clean fresh water
• Reduce risk of disease from less mess from spilled water
• Less time spent topping up water supply for your pets

Each set of nipple drinker has three parts:

• Stainless Steel Nipple Drinker
• One T Connector for Multiple drinking line setup
• Spring to help fasten the nipple drinker to your pets cage

How to Setup:

• You need to connect the parts using a hose under low water pressure and hook it to your pet's cage.
• A soft tube with an inner diameter of 5/16" or 8mm is recommended (available in separate auction).
• Slide the soft tube over the T connector and the top of the nipple drinker to a water source like a bottle or bucket.
• You will need a pressure reducer (inline tap partially turned off to reduce flow) if connecting parts to water mains as the parts are not designed for high pressure systems.

How to Adjust Water Flow of Nipples:

• Adjust the water flow with a 5mm allen key to turn the internal valve.

Suggestion: Perhaps use two nipple waterer per cage to ensure if one blocks, they have access to another.

More available on request.

I have nipples for chickens if you need these instead.

Check out my other listings.