Built-In Battery: 80mAh rechargeable lithium battery can work continuously for 60 hours on a single charge Immersive Viewing Experience: 178°wide view angle and size of the 3D glasses’ lens enlarge 10% than normal 3D glasses. Enjoy the excellent 3D effect at any position Restore the true color: Adopt less than 2.0ms response light valve LCD lens. Luminousness has increased 8%; also, the definition and colorfulness of images have enhanced Compatibility: Compatible with XGIMI projectors MoGo/MoGo Pro/H2/H1/CC Aurora/CC Dark Knight & other DLP-LINK 3D projectors. Smart Chip: The 3D glasses only turn on when it receives DLP-Link’s signal, and it goes to the ready mode when the signal disappears.

Instructions for XGIMI 3D glasses

Charging time: around 2-3 hours Power on: Press the power button, one flash of the green LED light means the glasses have been turned on. Power off: Long press the power button for 3 seconds, the green LED light would flash for three times. Standby status: Over 5 seconds without 3D signal, glasses would automatically turn to standby mode, the green LED light would flash every 5 seconds. USB charging: Red indicator light on when charging, and it goes off after being fully charged. Low battery mode: when 3D glasses have low battery, the green LED light flashes five times continuously, then two times every 10 seconds. That means you need to feed it. To use 3D glasses, the first press would turn it on, the second press would adjust the image quality, and keep pressing it to adjust the 3D effect on glasses until the image is clear. ( You need to choose the up/down 3D or left/right 3D effect when playing videos on the projector).