An excellent hollower for medium to large vessels, The new linkage design that lock into indexing positions and micro adjustment to accurately adjust the depth of cut. This tool allows for both inboard and outboard turning and Steady articulating arm rigs. They come with a 10mm titanium chromium coated cutter and sharpening Jig. Used alone or in combination with Rolly’s articulating Shear Scraper will give you the best result possible on a wide range of timbers as the articulating cutter head allows you to form a large range of vessel shapes and sizes, and to reach difficult areas such as the inside shoulders of semi-enclosed forms.

An adjustable hood over the circular carbide steel cutter sets depth of cut – open for heavy hogging, to near closed for fine shear cuts. Also the cutter can sharpening by jig that is Included.

The stainless steel shaft is 5/8" in diameter an 15.1/2" long and allows a substantial reach into deep vessels. (Handle Not Included) The hollow aluminium handle with rubber moulded outer grip give great comfort is 19-1/2" long by 1-3/4 in diameter. Ballast, such as lead shot, can be added for stability and to absorb vibration. The tool shaft secures with a three-wing knob that, when aligned with the cutter head, provides a visual reference of the cutter position within hollow forms.

The cutter head and arm linkages are all made from surgical stainless steel. Comes with one titanium chromium coated cutter installed and ready to go and sharpening jig, hex keys set, and instructions.

Any questions let us know Wood Grain NZ Woodturning

For more info check out on our website.

Thanks David Gillard Wood Grain NZ Woodturning